TL;DR
ReTile introduced 12-inch-square magnetic backsplash panels at DIY Con in Dallas and is currently taking preorders. The panels attach to magnetic disks and can be removed and swapped, but the disks’ adhesive is not currently removable, so taking them off may damage the wall.
ReTile has introduced magnetic backsplash panels that can be removed and swapped without relying on adhesive-backed tiles, presenting the product recently at DIY Con in Dallas. The 12-inch-square panels attach to small magnetic disks mounted on a wall or existing backsplash, and the product is currently in preorder; however, the disks’ adhesive is not currently designed to come off without possible wall damage.
Get furniture and decor delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
The panels are made from stone-plastic composite and have a thin magnetic surface on the back. For installation, the disks are positioned on an indoor wall with a smooth surface, and the panels are cut to fit using a utility knife, box cutter or heavy-duty scissors. Once in place, the panels can be pulled off and repositioned on the disks, allowing a homeowner to change the pattern or orientation without removing a large sheet of sticky tile.
ReTile describes the panels as water- and heat-resistant, making kitchens—including areas behind stoves and sinks—among the proposed uses. The product may also suit pantries, laundry rooms, bathrooms, coffee bars and smaller accent areas. The description excludes showers. Suitability for any particular surface or exposure will depend on installation conditions and product specifications, which were not detailed in the available announcement.
The panels are intended to be reused, and buyers could use different patterns for seasonal or decorative changes. The product description recommends labeling cut pieces with their locations so they can be put back in the same arrangement. Additional full sheets may be needed if the panels are moved to a different area with different dimensions.
A backsplash that can change without replacing every panel
ReTile’s magnetic panels are designed to be removed and rearranged. The wall-mounted disks still use adhesive that may cause damage when removed.
How the system works
Small magnetic disks attach to a smooth indoor surface; cut panels sit on the disks and can be repositioned.
Place them on a smooth indoor wall or existing backsplash.
Trim to fit with a utility knife, box cutter or heavy-duty scissors.
Remove and reposition panels on the disks. Label cut pieces to help restore their arrangement.
Where it may fit
ReTile describes the panels as water- and heat-resistant for indoor uses, with showers excluded.
Backsplash areas
A changeable option for areas behind stoves and sinks, subject to installation conditions and product specifications.
Smaller indoor updates
Potential uses include pantries, laundry rooms, bathrooms and coffee bars.
What the trade-off means
- Designed to be removed, reused and rearranged.
- Moving them to a differently sized area may require additional full sheets.
- Use adhesive to attach to the wall.
- Removing the adhesive may leave marks or damage.
A Backsplash That Can Be Reworked
A backsplash is a prominent part of many kitchens, but replacing conventional tile can involve demolition and installation, while peel-and-stick products may be difficult to remove cleanly. ReTile’s proposed design addresses that trade-off by making the visible panels removable and reusable, without requiring the tile itself to be attached directly to the wall with a large adhesive backing.
That could appeal to homeowners who want to change a room’s appearance without committing to one pattern, as well as people looking for a smaller project than a full tile replacement. A changeable backsplash could also be used in a coffee bar, laundry area or other small space where conventional tile installation may feel disproportionate. These are potential uses, not confirmed results from independent testing or customer experience.
The rental appeal is more limited for now. Although panels could potentially be taken along after a move, the mounting disks use an adhesive that may leave damage when removed. Reusable panels do not yet mean damage-free removal, and the maker’s planned approach may not fit renters who cannot alter walls.
Products Worth Considering

Philips Hue Bridge Pro Starter Kit with 4 A19 E26 Color Smart Bulbs

Dyson Airwrap i.d. Multi-Styler with Bluetooth Connectivity

Shark PowerDetect Robot Vacuum and Mop Combo with 60-Day Self-Emptying Base (AV2800ZE)
As an affiliate, we earn on qualifying purchases.
How the Magnetic Mounting Works
The product is presented as an alternative to two common backsplash approaches: permanent tile installation and adhesive-backed peel-and-stick sheets. Rather than applying a continuous adhesive layer behind each panel, ReTile’s system uses small magnetic disks attached to a smooth indoor surface. The panels are cut to match the area and placed over the disks.
That distinction may make it easier to swap a panel or change a layout, but the mounting points still rely on adhesive. According to the product description, removable adhesives such as Command strips are not currently considered heat-resistant enough for kitchen use. The inventor told Hunker at DIY Con that a renter-friendly adhesive is still being researched. The company’s current configuration therefore retains a potential wall-repair issue, even if damage from a few small disks could be easier to address than damage from a larger adhesive tile sheet.
“A renter-friendly, damage-free adhesive is in the research stage.”
— The inventor, speaking to Hunker at DIY Con
Price, Launch and Wall Compatibility
The available details do not specify pricing, a shipping date, preorder terms or the full range of designs. It is also unclear whether the product’s specifications or mounting options will change before launch; the described caveat around adhesive strength may change as the offering develops.
Although ReTile describes the panels as water- and heat-resistant, the available information does not provide test results, temperature limits or guidance for every surface and placement. The product is excluded from showers, and its suitability around a specific stove, sink or wall finish should not be assumed beyond the stated claims. The size and likely repair needs of any damage from removing the magnetic disks are also not quantified. No independent installation or durability results are provided.
Preorders Await Product Details
ReTile is currently taking preorders after presenting the panels at DIY Con. Prospective buyers will need to check the company’s product information for the available patterns, price, delivery timing and installation requirements before deciding whether the system fits their space.
The other development to watch is whether the planned research produces a removable, heat-resistant adhesive. Until ReTile provides further details, the current installation should be treated as a system that can make the panels swappable but may leave marks or damage when the mounting disks are removed.
Key Questions
How are ReTile backsplash panels installed?
Small magnetic disks are attached to a smooth indoor wall or existing backsplash. The 12-inch-square panels are cut to fit with a utility knife, box cutter or heavy-duty scissors, then placed on the disks.
Can the panels be removed without damaging the wall?
Not necessarily. The panels can be removed from the magnetic disks, but the current disk adhesive is not described as removable and may damage the wall when taken off. A damage-free adhesive is still being researched.
Where does ReTile say the panels can be used?
The product is described for indoor uses including kitchen backsplashes, pantries, laundry rooms, bathrooms and coffee bars. The description says the panels are water- and heat-resistant but excludes showers; the available details do not give specific exposure limits.
Can the panels be reused in a different arrangement?
Yes. ReTile describes the sheets as reusable and says they can be swapped or repositioned. Labeling cut pieces by location may help restore their original layout, and a new area may require additional full sheets.
When will ReTile ship, and how much will it cost?
The product is currently in preorder, but the available announcement does not state its price or shipping date. Buyers should check ReTile’s current listing for those details.
Source: hunker.com
